Chọn một quốc gia hoặc khu vực khác để xem nội dung cho vị trí của bạn.
United States
22:18:02 GMT+0000 (Coordinated Universal Time)
MKLF52-245-E-ZR
Linear actuator
Clamping actuators with external track roller guidance system and toothed belt drive. Basic design, two carriages driven in opposing directions
Thông tin về sản phẩm
Hệ mét
Hệ đo lường Anh
Main Dimensions & Performance Data
| B1 | 145 mm | Total Width |
| H | 125 mm | Height |
| L | 245 mm | Length |
Mounting dimensions
| D86 | 95 mm | |
| D87 | 115 mm | Ø Bolt circle |
| d85 | 20 mm | |
| d86 | 76 mm | Ø Inner Fit |
| L88 | 31 mm | |
| G43 | M10 | Thread |
| G87 | M8 | Thread |
| h85 | 60.6 mm | |
| JB43 | 105 mm | |
| JL43 | 160 mm | Tolerance ±0,2 |
| jB8 | 80 mm | |
| NB85 | 6 mm | Width of Keyway |
| NL85 | 25 mm | Length of Keyway |
| NT85 | 3.5 mm | Depth of Keyway |
| T86 | 4 mm | Depth Fit |
| Tol T86 up | 0.5 mm | Upper tolerance |
| Tol T86 low | 0 mm | Lower tolerance |
| t43 max | 24 mm | Depth of Thread |
| t87 max | 15 mm |
Dimensions
| B2 | 112 mm | Width of Support Rail |
| B4 | 111 mm | Width of Return Unit |
| B72 | 2 mm | |
| H1 | 53.8 mm | |
| H2 | 98.6 mm | Height |
| H4 | 118.3 mm | Height of Return Unit |
| H7 | 65.4 mm | |
| h13 | 25 mm | |
| h14 | 50 mm | |
| L2 max | 8,000 mm | Maximum length of Support Rail |
| L4 | 115.5 mm | |
| L6 | 6 mm | Length of Wiper Brushes |
| S | 85 mm | Dimension |
Technical data
| mLAW | 7.69 kg | Mass of Carriage |
| vmax | 8 m/s | Maximum Speed |
| amax | 40 m/s2 | Maximum Acceleration |
| Rx | 105 mm | |
| Ry | 90 mm | |
| Rz | 386 mm | |
| I C | 17,800 N | Load direction I: compressive load |
| I C0 | 8,900 N | Load direction I: compressive load |
| II C | 17,800 N | Load direction II: tensile load |
| II C0 | 8,900 N | Load direction II: tensile load |
| III C | 28,400 N | Load direction III: lateral load |
| III C0 | 15,500 N | Load direction III: lateral load |
| M0x per | 180 Nm | Max. permissible static moment per Carriage 1 |
| M0y per | 800 Nm | Max. permissible static moment per Carriage 1 |
| M0z per | 460 Nm | Max. permissible static moment per Carriage 1 |
| Iy | 386 cm4 | Geometrical moments of inertia of Support Rail 2 |
| Iz | 301 cm4 | Geometrical moments of inertia of Support Rail 2 |
Additional information
1,780 Nm | Max. permissible drive torque | |
4xLFR5301-10-2Z | Track Rollers | |
0.1 mm | Repeat Accurancy ± | |
270 mm | Feed (mm/rotation) | |
32AT10 | Toothed Belt | |
0.2 kg/m | Mass of Toothed Belt | |
1,750 N | Permissible Toothed Belt operating force | |
12.6 kg*cm2 | Mass moment of inertia of Gears |
Temperature range
| Tmin | 0 °C | Minimum operating Temperatur |
| Tmax | 80 °C | Maximum operating Temperatur |
Chú thích
1
2
Tải xuống:
Mẫu mã sản phẩm hiện tại của bạn
| Size code | 52 | |
| Length of carriage | 245 | 245 mm |
| Carriage design | E | Strengthened carriage |
| Drive type | (3)ZR | Toothed belt drive |
| Additional carriage | / | No additional carriage |
| Support rail design | / | One-piece |
| Bellow | / | No |