Chọn một quốc gia hoặc khu vực khác để xem nội dung cho vị trí của bạn.
United States
21:49:18 GMT+0000 (Coordinated Universal Time)
GIHNRK250-LO
Rod end
Hydraulic rod end, with thread clamping device, right hand thread, requiring maintenance, sliding contact surface: steel/steel, DIN 24338 ISO 6982, open design
Thông tin về sản phẩm
Hệ mét
Hệ đo lường Anh
Main Dimensions & Performance Data
Cr | 3,570,000 N | Basic dynamic load rating, radial |
C0r | 5,440,000 N | Basic static load rating, radial |
d | 250 mm | Bore diameter bearing |
d2 | 570 mm | Outer eye diameter |
l4 | 815 mm | Total length internal thread head |
D | 400 mm | Outside diameter bearing |
B | 250 mm | Width inner ring |
≈m | 395 kg | Trọng lượng |
Dimensions
α | 4 ° | Tilt angle |
C1 | 192 mm | Width of the rod end |
C2 | 142 mm | Width |
dK | 350 mm | Ball diameter |
d3 | M200x4 | Thread size |
d4 | 300 mm | Shank diameter |
d5 | 420 mm | Shank diameter, large |
d 7 | M36x140 | Diameter |
h1 | 530 mm | Shank Length Internal thread head |
l3 | 205 mm | Thread length Internal thread |
l7 | 265 mm | Distance drilling with/shaft start |
dUT | 0 mm | Bore diameter bearing, lower tolerance |
dT | H7 | Bore diameter bearing, tolerance |
dOT | 0.046 mm | Bore diameter bearing, upper tolerance |
BUT | -0.46 mm | Width inner ring, lower tolerance |
BOT | 0 mm | Width inner ring, upper tolerance |
MA | 2,280 Nm | Tightening torque |
FZ | 3,200,000 N | Cylinder Force |
Gr | 0,065 - 0,239 | Radial Clearance |
Grmin | 0.065 mm | Radial clearance, minimum |
Grmax | 0.239 mm | Radial clearance, maximum |
Mounting dimensions
r1smin | 0.6 mm | Edge Spacing |
d1 | 317 mm | Outer flange diameter inner ring |
Temperature range
Tmin | -60 °C | Operating temperature min. |
Tmax | 200 °C | Operating temperature max. |