Chọn một quốc gia hoặc khu vực khác để xem nội dung cho vị trí của bạn.
United States
15:30:15 GMT+0000 (Coordinated Universal Time)
MKLF32-155-ZR
Linear actuator
Clamping actuators with external track roller guidance system and toothed belt drive. Basic design, two carriages driven in opposing directions
Thông tin về sản phẩm
Hệ mét
Hệ đo lường Anh
Main Dimensions & Performance Data
| B1 | 86 mm | Total Width |
| H | 82 mm | Height |
| L | 155 mm | Length |
Mounting dimensions
| D86 | 70 mm | |
| D87 | 80 mm | Ø Bolt circle |
| d85 | 20 mm | |
| d86 | 61 mm | Ø Inner Fit |
| L88 | 25 mm | |
| G43 | M8 | Thread |
| G87 | M6 | Thread |
| h85 | 41.5 mm | |
| JB43 | 59 mm | |
| JL43 | 100 mm | Tolerance ±0,2 |
| jB8 | 43 mm | |
| NB85 | 6 mm | Width of Keyway |
| NL85 | 16 mm | Length of Keyway |
| NT85 | 3.5 mm | Depth of Keyway |
| T86 | 2.3 mm | Depth Fit |
| Tol T86 up | 0.3 mm | Upper tolerance |
| Tol T86 low | 0 mm | Lower tolerance |
| t43 max | 14 mm | Depth of Thread |
| t87 max | 12 mm |
Dimensions
| B2 | 75 mm | Width of Support Rail |
| B4 | 74 mm | Width of Return Unit |
| B72 | 2 mm | |
| H1 | 32 mm | |
| H2 | 66.5 mm | Height |
| H4 | 81.5 mm | Height of Return Unit |
| H7 | 47 mm | |
| h13 | 25 mm | |
| L2 max | 8,000 mm | Maximum length of Support Rail |
| L4 | 80 mm | |
| L6 | 6 mm | Length of Wiper Brushes |
| S | 85 mm | Dimension |
Technical data
| mLAW | 1.8 kg | Mass of Carriage |
| vmax | 8 m/s | Maximum Speed |
| amax | 40 m/s2 | Maximum Acceleration |
| Rx | 60 mm | |
| Ry | 20.5 mm | |
| Rz | 54 mm | |
| I C | 4,100 N | Load direction I: compressive load |
| I C0 | 2,400 N | Load direction I: compressive load |
| II C | 4,100 N | Load direction II: tensile load |
| II C0 | 2,400 N | Load direction II: tensile load |
| III C | 6,600 N | Load direction III: lateral load |
| III C0 | 4,200 N | Load direction III: lateral load |
| M0x per | 30 Nm | Max. permissible static moment per Carriage 1 |
| M0y per | 130 Nm | Max. permissible static moment per Carriage 1 |
| M0z per | 70 Nm | Max. permissible static moment per Carriage 1 |
| Iy | 104 cm4 | Geometrical moments of inertia of Support Rail 2 |
| Iz | 76 cm4 | Geometrical moments of inertia of Support Rail 2 |
Additional information
18 Nm | Max. permissible drive torque | |
4 x LFR50/8-6-2Z | Track Rollers | |
0.1 mm | Repeat Accurancy ± | |
175 mm | Feed (mm/rotation) | |
20AT5 | Toothed Belt | |
0.068 kg/m | Mass of Toothed Belt | |
640 N | Permissible Toothed Belt operating force | |
2.2 kg*cm2 | Mass moment of inertia of Gears |
Temperature range
| Tmin | 0 °C | Minimum operating Temperatur |
| Tmax | 80 °C | Maximum operating Temperatur |
Chú thích
1
2
Tải xuống:
Mẫu mã sản phẩm hiện tại của bạn
| Size code | 32 | |
| Length of carriage | 155 | 155 mm |
| Carriage design | / | Standard carriage |
| Drive type | (3)ZR | Toothed belt drive |
| Additional carriage | / | No additional carriage |
| Support rail design | / | One-piece |
| Bellow | / | No |